溜槽是如何分类的,青州冠诚重工机械有限公司告诉您。
溜槽的种类繁多,根据处理矿石的粒度可分为三大类:(1)粗粒溜槽,处理粒度为2~3mm以上的粒级,其给矿最大粒度可达100~200mm,主要有固定溜槽、罗斯溜槽、带格胶带溜槽;(2)细粒溜槽,处理粒度为2~0.074mm的粒级,主要有尖缩溜槽和圆锥选矿机;(3)微细粒溜槽(又称矿泥溜槽),给矿粒度小于0.074mm,其有效回收粒度下限可达10um,主要有莫利兹选矿机(即40层摇动翻床)、矿泥皮带溜槽、振摆皮带溜槽、横流皮带溜槽等。粗粒溜槽和细粒溜槽并称矿砂溜槽,是构造最简单,设备投资和操作费用最省,溜Iiu处理能力又大的粗选设备;而微细粒溜槽则是回收粒度下限最低的重选设备之一。
影响溜槽选矿的工艺因素有:给矿体积流量、给矿浓度、给矿粒度、给矿周期时间(指间歇工作溜槽)、槽子长度和倾角、槽面的铺面材料、槽面的运动特性(转速和振幅)等。
To mine chute are different according to the processing of ore size can be divided into three categories: (1) coarse chute, particle size of 2 ~ 3mm above the grain size and the maximum size of up to 100 ~ 200 mm, mainly with a fixed chute, Ross chute, lattice belt chute; (2) fine chute, particle size 2 to 0.074mm particle level, mainly with a sharp shrinkage chute and cone concentrator; (3) fine particle chute (also called slime sluice) to the ore particle size less than 0.074mm, the effective recovery of lower size limit can reach to 10um, mainly Mo Leeds concentrator (i.e. 40 storey swing over bed), slime belt chute, oscillating belt chute, the cross belt chute. Coarse grained chute and fine-grained chute and ore chute, is the simplest construction, equipment investment and operation cost of the province, slipped Iiu processing capabilities and high roughing equipment; and micro granular chute is recovery of lower size limit the lowest gravity equipment.
影响溜槽选矿的工艺因素有:给矿体积流量、给矿浓度、给矿粒度、给矿周期时间(指间歇工作溜槽)、槽子长度和倾角、槽面的铺面材料、槽面的运动特性(转速和振幅)等。
Effect of chute beneficiation process factors: to ore volume flow, to concentration of ore, ore granularity, to mining cycle time (fingers rest work chute), trough length and angle, groove surface paving material, groove surface movement characteristics (speed and amplitude).
买选金溜槽,首选青州冠诚重工机械有限公司。